Ender-3 V3 SE 3D-Drucker Sprite Direktextrusion/Duale Z-Achse/IU Display CR Touch
$ USD
$ USD
Ship From
Model-1
Please select product attributes before purchasing~~
Option
Ship to
It is expected to arrive within and will cost
$
USD to ship
This item can't be shipped to this Country/Region
Bundles
${ meal.title }
${ meal.skus }
${ sku.name }：
${ skuVal }
$${
meal.price }USD
$${
meal.oldPrice }USD
Quantity
28 Available
Add To Cart
Buy It Now
Ender-3 V3 SE 3D-Drucker Sprite Direktextrusion/Duale Z-Achse/IU Display CR Touch
${propertiesText}
x ${productNum}
Added to the cart
Continue To Shopping
View Cart
People who bought this item also bought
Capable "Sprite" Direct Extruders
Die Direktextrusion ermöglicht eine reibungslose Zuführung verschiedener Filamente, einschließlich PLA, PETG und TPU.
Schnellere Druckgeschwindigkeit
Eine durchschnittliche Druckgeschwindigkeit von 180 mm/s und maximal 250 mm/s! Sie können Ihre Modelle schnell mit großartigen Ergebnissen drucken.
Max. Druckgeschwindigkeit: 250 mm/s* Beschleunigung: 2500 m/s² 
220x220x250mm Baugröße und kompakteres Design
Die neueste Ergänzung von Creality 3D ist die V3 SE. Beibehaltung einer Baugröße von 220x220x250mm.
Kompakteres Design — Es kombiniert übersichtliche X-, Y- und Z-Achsen, glatte T-förmige Profile und unauffällige Spannelemente. Klein, aber voll funktionsfähig.
Innerhalb von 20 Minuten gestartet*
Einfach zu montieren, CR Touch Auto Leveling. Freundlich für neue Benutzer.
Sorgenfreies automatisches Nivellieren
CR Touch für automatische Nivellierung und Dehnungssensor für automatischen Z-Offset. Es ist einfach, eine perfekte erste Schicht zu bekommen.
Y-Achsen-Linearwellen und Doppel-Z-Achsenschrauben
Zwei Z-Achsen, die durch einen hochwertigen Zahnriemen synchronisiert werden, sorgen für eine hohe Druckqualität. Die verschleißfesten Linearwellen aus Stahl sorgen für eine dauerhafte, gleichmäßige Bewegung der Y-Achse.
Automatisches Laden/Entladen von Filamenten
Tippen Sie einmal, um das Filament zu laden, und ein Tippen, um es zu entladen. Praktisch für den Filamentwechsel.
Intuitive UI-Anzeige
Die Benutzeroberfläche zeigt den Nivelliervorgang und die Druckparameter übersichtlich mit Bewegungsgrafiken an.
Produktparameter des 3D-Druckers ENDER-3 V3 SE
Volumen aufbauen
220*220*250 mm
Typische Druckgeschwindigkeit
180 mm/s
Max. Druckgeschwindigkeit
250 mm/s
Beschleunigung
2500 mm/2
Genauigkeit beim Drucken
±0,1 mm
Schichthöhe
0,1-0,35 mm
Düsentemperatur
≤260 °C
Temperatur des Heizbetts
≤100 °C
Nennleistung
350 W
Nennspannung
100-120 V~200-240 V~, 50/60 Hz
Übertragung von Dateien
SD-Karte, USB-C-Kabel
Unterstützte Filamente
PLA, PET, TPU (95A)
CR-6 SE
Mainboard/Screen Firmware, SD Card Files, Video Tutorial
Customer Reviews
Based on 28 reviews
79%
(22)
11%
(3)
4%
(1)
4%
(1)
4%
(1)
Write A Review
Ask A Question
Hugo Camara
Its a good printer but the problem its the refactions, that in my contry Mexico, theres not refactions of this printer, so becareful with this problem
Brandon
I like it!
I upgraded after the demise of dear little MP Mini and WOW. I never knew what I was missing.
This printer is a lot more automated and "set and forget" in nature, so if you like to tinker, it's probably not ideal. If you want to get reliable prints, you can't go wrong.
I've had it for several months now and I love it.
(This is a real human review by a human. Not paid. I'm a fan.)
Robert Rosenbaum
This is a Fantastic Printer.
Major upgrade from the Ender-3 V2.
It is so simple to assemble- just the attached the gantry to the bed and connect a few wires.
Best highlights- the auto bed-leveling, the direct drive extruder, faster speeds.
I would highly recommend this printer to anyone- beginner, intermediate or advanced.
Randy J Bowyer
the software on my laptop freezes when i try to load a file.
Peter Christ
Perfect device!
Runs wonderfully, printouts are damn good without having to calibrate anything. Setup is really easy, done super quickly.
The stock firmware is unfortunately very trimmed, but very good for beginners. Everyone else is flashing anyway.
I can only recommend the device, there are many things to do for hobbyists, beginners get a well-equipped device!
Sippyjount
This printer is my 5th printer so far (as I've gone a bit overboard with this hobby). My previous printers range from "child's" printer, to an enclosed, expensive IDEX printer. One of my printers though was an open source "triple-extruding" little diddy that I could just not get to work correctly for the life of me. As I have 3 children under 6, I just did not have time to spend troubleshooting and fixing the issue, so I put that printer aside for a rainy day, found a great deal on a V3 (so good, in fact, I thought it would be a hocked refurb or broken one), and ordered it.
I received my V3 SE 3 days later (only because I ordered on a Saturday, otherwise it would have been 2 days). My oldest watched me set it up, and with mild distractions it took about 25 minutes from unboxing to staring at Cura, I mean Creality Slicer, tweaking the settings on my first print. Besides me causing issues to my first print from worrying the settings weren't right, this thing has spent the first 24 hours of print time printing flawless prints with no stringing or issues of any kind. Not to mention, out of all my printers, I cannot hear this thing at all. Besides the power supply this thing is dead silent. My $1000 printer can be heard throughout the house, thus me being scolded every morning after running it all night. My wife loves this printer as she can't even tell it's running half the time.
Long story short, this printer is phenomenal and can be found at around the same price as an Ender V2 despite its apparent upgrades. If you are on the fence like I was this time around, I beg you to highly consider this printer as I love it!
Dan Prouty
Q
Is this a new machine or refurbished machine, and how long to get one from time of order.
A
Full New Items
$
USD
$
USD
ADD TO CART
BUY IT NOW
Write a review
*Name
*Email
*Body of Review
*Rating
Customer Image
Submit Review
Ask a Question
*Name
*Email
*Question
Submit Question