Ender-2 Pro Mini 3D Printer

Braced Z-AXIS | Built-in Power Supply | Magnetic Print Surface | Dual Part Fans  | Build size: 165 x 165 x 180 mm

$ 145.00 USD $ 169.00 USD 2021 NEW
10 reviews
Ship From
  • United States
  • Australia
  • Czech Republic
  • United Kingdom
Please select product attributes before purchasing~~
Model-1
  • Ender-2 PRO
Shipping
This item can't be shipped to this Country/Region
It is expected to arrive within3 daysand will cost£10to ship
Quantity
0.00 0.00 2021 NEW

Ender 2 Pro: Build Size and More Features

Build size: 165 x 165 x 180 mm 
Leveling method: Manual leveling 
Resume printing: Supported 
Filament detector: No 
Nozzle temperature: ≤ 260℃ 
Hotbed temperature: ≤ 80℃ 
Rated power: 150W 
Printing speed: ≤ 100 mm/s. Average printing speed: 60mm/s 
Extrusion method: Bowden extruder 
Display: With a 12864 integrated screen, you can implement interactions with control knobs.

Easy to operate and dare to create: Ender-2 Pro 3d printer newly launched with 7 User-friendly Designs. Even for novices, you can quickly get started and let the creativity flow.   

Light and Portable, you can carry Ender-2 Pro 3d printer everywhere:  As light as 4.65kg, with a size comparable to a desktop fan. Equipped with an easy-to-carry handle, its lightweight design makes it super easy to move. 

Quick Assembly in Four Steps:  Ender-2 Pro comprehensively meets your needs for ease of assembly. The product is a 90% pre-installed device. You only need to tighten 7 screws. That is it! 

Cantilever Structure:  The simplified, unique cantilever structure offers a lightweight design. With an extra Z-axis fixed block, it can support heavier loads and lean positioning, remaining stable throughout the entire printing process.

Ender-2PRO: 4.2.3 Mainboard
Ender-2 ProMarlin2.0.6.1X165HW4.2.3.bin
Ender-2PRO: V2.4.S4 Mainboard
Ender-2pro-hw2.4.s4xx-sw2.2.36_165.bin
Customer Reviews

Based on10reviews

  • 70%
  • 20%
  • 10%
  • 0%
  • 0%
Write A Review
Ask A Question
Max Schmer
verified
This is a phenomenal beginner-level printer for all ages and the print quality is top notch with Prusa Slicer, but it has two similar problems the Ender 3 Pro had: 1) The magnetic bed it comes with is tricky to get prints to stick to it without some kind of adhesion help, such as glue stick or hair spray. A 165x165mm PEI bed or custom cut glass one will serve you much better. 2) The stainless springs are quite weak. There are much stronger yellow springs and silicon socks that fit right into it (see picture) and make it much easier to keep level. Both of these optional (but highly recommended) upgrades will set you back about $20 on Amazon. A huge positive is that it took all of a few minutes to set up from packed in the box to out and printing. All that's required are a few screws set in place, it couldn't be easier. The handle on the top makes it convenient to travel with, especially if you intend to bring it to conventions or on a road trip. All in all, it's a great printer but still makes the same mistakes the Ender 3/Pro did. I still have hope that Creality will start packing their machines with stronger bed springs and a glass or PEI bed instead of the sub-par magnetic ones.
Toby
verified
Purchased from Amazon, my first 3D printer I am pleased with this printer. I ran it for 20 hours before even bothering to print the Ed Benchy model. I bought it because I wanted to get going quickly and easily without assembling an Ender 3 or Voxelab Aquilla. After a little bit of troubleshooting, I had it printing the small rabbit file included on the SD card in no time. With minimal knowledge gained by watching a handful of YouTube videos in the days leading up to delivery. The only complaints I have is the X axis wheels were way too tight from the factory, and adjusting them with the bed on is a bit of a chore, and if you take the bed off to do it, one of the leveling knobs is a bit tricky to put back on. That being said, the wheels had flat spots because it bound in a couple places along the Y axis, but proper adjustment took care of it, and it has not affected print quality The CURA profile for the original Ender 2 works. I print at a speed of 50mm/s. 1.2 and 1.6 nozzle height gives the best prints, but I use 2.8 and 10% infill after performing an experiment with my 3d models I make, just for the sake of saving time.
db
verified
great machine, sad its being discontinued, great price and fast delivery, thank creality
Ieuan Lewis
verified
first printer was so good at small parts, I bought this second printer as a spares machine.
Ariel Kaminski
verified
Great price. Mega fast shipping and really good Creality product - Ender 2. Thank You.
Darrell Hatton
verified
Love this! I have a Ender 3 Pro it's an awesome printer!!! But looking for my second printer I decided to go with a smaller one for smaller prints. I am someone who searches for quality, dependability and price before ever purchasing! Read 100s of reviews and watched dozens of videos and decided on my second Creality!!! I wasn't wrong... It's an awesome printer! While I am still getting my settings tuned in, I have had some really great prints. Printed great out of the box though, about 20 min from opening to printing. Now... My delima is... Which Creality am I going to get next???
Ender-2 Pro Mini 3D Printer
-
£ 239
Added to the cart